SIKO GmbH: "Process efficiency up, investment costs down", that is the formula for success of optimal machining processes. A key factor here is the shortening of cycle times. The DriveLine actuating drives of SIKO GmbH make this possible. With its...
SIKO GmbH’s compact wire-actuated encoders are backed by decades of experience and offer an easy-to-install and reliable way of linear position measurement. A wide range of industrial applications is possible, even in difficult environmental...
Waycon: Ultrasonic sensors perform two tasks in one process in the agriculture industry for vegetable cleaning. Fresh vegetables from the field must be cleaned quickly in large quantities, packaged and transported to the supermarket. At first a...
4B BRAIME Components LTD: The RLI “Shaker” rotary paddle switch is used to detect high / low levels of bulk granular solids in bins, tanks and silos. It can also be used to detect plug conditions in spouts, where long life and failsafe...
4B BRAIME Components LTD: 4B’s adjustable depth bearing (ADB) temperature sensors have been designed to allow the depth of the probe to be adjustable depending on the application. The ADB series are available with three standard probe lengths of...
SNT Sensortechnik AG: Fresh vegetables from the field must be cleaned quickly in large quantities, packaged and transported to the supermarket. At first a lot of dirt sticks on the carrots. They are cleaned in water baths and then brushed clean...
Sensirion: In April 2010 Sensirion started serial production of the SHT21, the standard version of its new generation of digital humidity and temperature sensors. Now, on the occasion of the Electronica 2010 trade show, the sensor manufacturer is...
SENSeOR: Facing promising sales developments and willing to expand its presence over Europe and the US, SENSeOR has appointed OCEANA SENSOR and BUSCH ELECTRONICS for distribution of its complete offer of temperature measurement systems in the US,...
SCHMIDT Technology: Although compressed air is 'only' air under pressure, at 1.5 to 3 cents per cubic meter, it is one of the most expensive carriers of energy. This is reason enough to use it sparingly. The use of suitable sensors helps analyse...
Scaime, leading manufacturer in the field of weighing components and solutions, is extending its range of stainless steel and welded sealed shear beam load cell. Designed to fit with industrial applications and more specifically legal for trade...
Scaime New SP1 String Pot is compact, economical and a durable device that is extremely easy-to-install and has four measurement ranges: 120, 317, 635, 1 270 mm. The SP1 is also resistant to “free release” of the cable without damage, a...
Scaime announces the introduction of the ZA30X S-type load cell series. With its full stainless steel construction and complete hermetic sealing, the new ZA30X models are rated to IP68 and provide high resistance to ingress. Certified to OIML...
Scaime: Leader on load cell market, SCAIME presents a new solution for tank, silo and bulk weighing. Combining an ultra-flat load cell R10X with a mounting kit SILOKITR, this unit is the right solution for inventory or level monitoring...
Scaime: Offering a very thin probe of Ø10mm, this new pressure transducer, or level liquid data logger can be inserted inside narrowest wells. Available in operating pressure range from 10m H2O to 100m H2O, its combined error is less than 0,1%....
Scaime: The new M150 stringpot (cable extension transducer) has a measuring range of 38 mm, fits into tiny spaces and is the perfect position sensing solution for a variety of applications such as robotics, biomedical, aerospace testing and...
Scaime, leader on the weighing components market, is launching the new indicator/transmitter IPE50 designed for commercial weighing and industrial process control applications. The IPE50 makes it possible to connect up to 8 strain gauge sensors...
Scaime: The new force sensor type MS02 made in stainless steel allows to measure the effort in compression or/and tension with a very high accuracy. Measurement error is less than or equal to 0.02% of its full scale, Various measurement scales are...
Scaime: With its new digital transmitter eNod, SCAIME offers a low-cost and powerful solution to convert any strain gauge sensor into an intelligent digital system. eNod integrates three advanced operating modes allowing control of static or...
Scaime, a World leader in load cells and weighing solutions, is introducing the eNod3-D, its new digital dosing controller. eNod3-D is an intelligent signal transmitter dedicated to integration into industrial automated systems. It takes control...
Scaime: This serie of torquemeter allows to carry out torque measurements with a speed up to 13 000 tr/mn and requires a small space (for ex: 105 mm for a torquemeter with a range of 1 000 Nm). This coupling allows to compensate the misalignment...
Scaime, a World leader in load cells and weighing solutions, is introducing the AXD, its new digital load cell dedicated to dosing/filling management and dynamic checkweighing control. The AXD offers capacities from 15kg to 75kg and, with a full...
Scaime: Leader on load cell market, SCAIME presents a new range of strain gage amplifiers. The CPJ series has been especially designed to meet the requirements of measurements in industrial environments and to deliver a standard output which may...
Scaime has combined its know-how in strain gauge load cells to the latest digital technology innovations in order to provide a new high performance digital compression load cell. The integration of analog-to-digital conversion into the CB50X-DL...
The Optris GmbH is expanding the product range of infrared thermometers: the new compact high performance IR thermometer optris CSlaser for temperature measurements from -50°C to 1600°C. Dr.-Ing. Ulrich Kienitz, managing director of Optris GmbH...
Optris GmbH is expanding its product range of infrared thermometers with the advanced all new optris PI USB IR camera for applications in product and process development, process control and mobile thermographic applications. Dr.-Ing. Ullrich...
Optris GmbH: The steady and innovative development of the product range of Optris GmbH results in the introduction of the enhanced infrared thermometers. “We are proud to be able to adjust our products to the needs of the market due to our...
microsonic GmbH: The hps+ ultrasonic sensors from microsonic are fitted out - as standard - with a Teflon film. It is sealed with a FFKM O-ring against the housing made of 1.4571 stainless steel or PVDF. This ensures a high degree of resistance to...
Micronas presents the CUR 315x current transducer family based on the Hall-effect principle. These new additions consist of the devices CUR 3150 and CUR 3155. Both programmable devices employ a digital output instead of an analog output. The...
Manner sensor telemetry: Due to the growing demand for weight reduction, transmission units have become increasingly compact. That also means that available space for the installation of measuring devices inside the transmission, for example...
Magtrol is launching the new WB23 dynamometer able to measure low torque motors (up to 80 mNm) with very high speed (up to 100,000 rpm). The air bearing reaction torque measurement allows high measuring accuracy of + / - 1% full scale. The system...
