Baumer: The new generation of VeriSens® vision sensors incorporates all the experience gained while solving many quality control and handling applications for our customers. A robust metal housing with IP 67 protection class reliably encases the...
Baumer: With the pressure transmitters PSMN and PSSN, Baumer offers compact submersible sensors for hydrostatic depth measurement. They are suitable in many level measurement applications in drinking water supply, wastewater, reservoirs, lakes and...
Baumer’s industrial pressure transmitter PBMN achieves maximum precision in measuring both low and high pressures by using different sensors. For pressures below 60 bar, a piezo-resistive silicon sensor is used. A metal thin-film sensor ideally...
Baumer: With the high-precision load cells of the DLRx series, Baumer offers sensors with passive temperature compensation for direct force measurement which boast a very low temperature effect of only < 0.005 %/K. Their high precision and...
Baumer: Digitalization plays a central role in modern automation technology. Nevertheless, in many applications there is still no better instrument than the analog encoder, either in aspects of cost-efficiency or because it is easier in...
Dytran Instruments, Inc. is pleased to announce the release of the 3343A series, which are triaxial IEPE-type accelerometers that weigh just 2.4 grams. The 3343A series was designed for use in modal analysis and Environmental Stress Screening...
HBM: For its type K-OL and K-OR optical strain gages, HBM now provides the K-OTC sensor, which can be used to compensate the temperature response of optical SGs. Experimental stress analysis is a typical application for optical strain gages (SG)...
HBM: The HBM process controllers can now be seamlessly integrated into an appropriate system via this new IPM interface so that the acquired production data can be directly transmitted to a quality assurance server for visualization and archiving....
HBM: The metrology technology specialist HBM offers a comprehensive range of products in the Industrial Process Control (IPC) sector for various applications, for example switch checks or monitoring of press-fit or forming processes. Quality...
Kistler: The Kistler Group has announced the global market launch of Kistler Type 8688A(x), a cost effective triaxial PiezoBeam accelerometer with very wide mounting flexibility, designed for accurate measurement frequency events from 0,5 up to 5...
Kistler: The new "QUALITY MOLDING powered by Kistler" seal sends a clear signal of zero-defect cavity pressure-based injection molding. The 100 % QUALITY MOLDING seal stands for zero-defect injection molding processes – particularly for the...
Kistler has introduced the Type 8315A…, a high-sensitivity, low-noise single axis MEMS capacitive accelerometer series. Incorporating the company's own K-Beam technology, the Type 8315A… is designed to measure acceleration and low-frequency...
Kistler: Swiss company Kistler Instrumente AG of Winterthur is the leading international supplier of sensors and systems for in-line cavity pressure-based quality monitoring of injection molding processes. German specialist Steinbeis Angewandte...
Leuze electronic: The new laser distance measurement systems AMS 300i offer a previously unmatched selection of integrated interfaces. In addition to the proven SSI Interface and the conventional RS Interfaces, the AMS 300i devices become...
Leuze electronic: The new MSI 100 programmable Safety Controllers – with 20 safe inputs – control machines with a wide range of different safety components, including E-STOP buttons, two-hand controls, Safety Switches, locking devices or light...
Leuze electronic: If, as is often necessary, several safety components are to act on a single switch-off circuit using a logical "AND" link, they can easily be connected to the new MSI-SR5 Safety Relay. Thus, using just one relay, the combined...
Micro-Epsilon was proud to present a local workshop for the company’s robot-based system reflectCONTROL. This newly developed measurement technology monitors paint defects on car bodies following paint line processing. Forty well-known guests...
Micro-Epsilon has launched a new miniature infrared sensor with an integrated controller. The thermoMETER CSlaser has a two-beam laser aiming feature, which marks the actual spot size at any distance. This means that faulty measurements on small...
Micro-Epsilon: The new optoNCDT ILR 1030 complements Micro-Epsilon's existing range of economical, low cost distance measurement sensors. The new sensor offers a measuring range between 0.2m and 8m on diffuse reflective surfaces, even as high as...
Micro-Epsilon’s new high-end laser triangulation sensor is known as the optoNCDT 2300. The new series offers a measuring rate that can be set up to 50kHz. The sensor will be offered initially as a set of 5 models with measuring ranges between...
SIKO GmbH: "Process efficiency up, investment costs down", that is the formula for success of optimal machining processes. A key factor here is the shortening of cycle times. The DriveLine actuating drives of SIKO GmbH make this possible. With its...
SIKO GmbH’s compact wire-actuated encoders are backed by decades of experience and offer an easy-to-install and reliable way of linear position measurement. A wide range of industrial applications is possible, even in difficult environmental...
Waycon: Ultrasonic sensors perform two tasks in one process in the agriculture industry for vegetable cleaning. Fresh vegetables from the field must be cleaned quickly in large quantities, packaged and transported to the supermarket. At first a...
4B BRAIME Components LTD: The RLI “Shaker” rotary paddle switch is used to detect high / low levels of bulk granular solids in bins, tanks and silos. It can also be used to detect plug conditions in spouts, where long life and failsafe...
4B BRAIME Components LTD: 4B’s adjustable depth bearing (ADB) temperature sensors have been designed to allow the depth of the probe to be adjustable depending on the application. The ADB series are available with three standard probe lengths of...
SNT Sensortechnik AG: Fresh vegetables from the field must be cleaned quickly in large quantities, packaged and transported to the supermarket. At first a lot of dirt sticks on the carrots. They are cleaned in water baths and then brushed clean...
Sensirion: In April 2010 Sensirion started serial production of the SHT21, the standard version of its new generation of digital humidity and temperature sensors. Now, on the occasion of the Electronica 2010 trade show, the sensor manufacturer is...
SENSeOR: Facing promising sales developments and willing to expand its presence over Europe and the US, SENSeOR has appointed OCEANA SENSOR and BUSCH ELECTRONICS for distribution of its complete offer of temperature measurement systems in the US,...
SCHMIDT Technology: Although compressed air is 'only' air under pressure, at 1.5 to 3 cents per cubic meter, it is one of the most expensive carriers of energy. This is reason enough to use it sparingly. The use of suitable sensors helps analyse...
Scaime, leading manufacturer in the field of weighing components and solutions, is extending its range of stainless steel and welded sealed shear beam load cell. Designed to fit with industrial applications and more specifically legal for trade...
