LP Series Pressure Sensors

What you get with the LP Series is a pressure sensor for very low pressures that is easy to solder to a printed circuit board (PCB) and connect to standard tubing, as shown in the image on this page. It allows you to measure differential or gauge pressure in calibrated ranges as low as 0 to 250 Pascals (0 to 1 inH₂O) with resolution better than 0.1 Pascals (0.0005 inH₂O). It is, along with all of Merit Sensor’s other products, made in our on-site wafer fab and assembly areas in Salt Lake City, Utah, USA.

Product highlights:

• Pressure Range: 2,49 to 68,9 mbar / 250 to 6.890 kPa / 0.04 to 1 psi
• Temperature Range: -40 to 85 °C
• Configuration: Differential or gauge
• Output: Uncompensated mV, analog 0,5 to 4,5 V, or digital I²C
• Accuracy: ±1,5 %FS
• Media: Clean, dry air and non-corrosive gases