Micro-Epsilon: The dimensionCONTROL Metal Profile Gauge offers new possibilities for process control and quality assurance in metal production. The system performs precise geometrical inspection of long products in harsh industrial environments....
Micro-Epsilon’s scanCONTROL 30xx laser profile scanners now offer a 5 times higher performance based on the new firmware V53. The exposure time has been optimized which enables significantly faster 2D/3D profile measurements.
Micro-Epsilon: The new surfaceCONTROL, reflectCONTROL and scanCONTROL generations from Micro-Epsilon represent a powerful 3D range of products for precise geometry, shape and surface inspections. A huge advantage lies in the powerful 3DInspect...
Micro-Epsilon: The 3D snapshot sensor surfaceCONTROL 3D 3200 is the right choice for precise geometry, shape and surface measurements on matt surfaces. The sensor has been developed for automated inline quality inspection. Its high z-axis...
Micro-Epsilon: Laser profile scanners from Micro-Epsilon perform true 3D measurements based on calibrated data. TU-Darmstadt already uses this technology. The powerful 3D sensors of the scanCONTROL 2900 series perform high-resolution measurements...
Micro-Epsilon: For fully automated inline inspection of unpopulated PCBs, 3D snapshot sensors from Micro-Epsilon are used. Unlike conventional test systems such as microscopes, they are more cost-efficient and work significantly faster. For...
Micro-Epsilon: The reflectCONTROL Sensor performs 3D surface inspections of glossy and shiny surfaces. The precise recognition of anomalies enables compliance with the highest quality requirements. Flatness deviations in the range of a few...
Micro-Epsilon: The innovative surfaceCONTROL 3D 3500 sensor from Micro-Epsilon is used for high-precision inline 3D measurements. With a repeatability of up to 0.4 µm in the z-axis, the sensor reaches a new performance level. The snapshot...
RIFTEK: We begin to offer the set for welding automation, which includes: specialized RF627Weld 2D laser scanner (three models with different ranges); controller (option); RIFTEL Lamia software for seam recognition and tracking; calibration plate for...
RIFTEK: The system is intended for non-contact measuring of width of sheet materials such as tapes, boards, plates, and so on. It is a stand-alone software and hardware system that contains optical micrometers and the indication device. System parameters...
RIFTEK: Riftek Lamia is a multifunctional and simple to use software application for control of automated industrial systems on the base of 2D laser scanners. Riftek Lamia is intended for: recognizing, tracking and measuring geometric parameters of objects...
RIFTEK: The system is designed for non-contact measurement of geometrical parameters (diameter, roundness, curvature) of large diameter pipes. Technical characteristics of the system can be changed for a specific task. Pipes nominal diameter, mm ...
RIFTEK: The systems are designed for making automatic measurement of geometric parameters of railway wheel sets in the course of incoming and outgoing inspections carried out in railcar/wheel shops, wagon depots....
RIFTEK: The system is designed for contactless automatic measurement of geometrical parameters of railway wheels and uses a combination of 2D laser scanners, mounted wayside in the track area. The system can be easily installed at any type of rail...
RIFTEK: First, we would like to inform that we discontinue production of outdated RF625 Series scanners and we no longer accept orders for them. Secondly, we expanded the line of RF627 scanners and now you can find devices with ranges up to 1000 mm (eleven...
RIFTEK: The sensors are designed especially for inspection of small diameter holes. For measurement, the laser probe is inserted into the controlled hole. The probe or the part is driven in rotation. A triangulation laser sensor, which is built...
RIFTEK: These projects continue our work in solving widespread ID measurement challenges. Operation of the system is based on the scanning of the tube inner surface by rotating point triangulation laser sensor. A measured tube must be installed...
RIFTEK: RF627 Series of Laser Scanners consists of 8 models with the Measuring Ranges from 10 to 250 mm, Linearity ±0.05% of F.S. and Measuring Range 485, 938, 6800 profiles/s. They are compact, high-precision and high-speed scanners with...
Micro-Epsilon offers a wide range of solutions for 3D surface inspection. The reflectCONTROL and surfaceCONTROL systems are intended for fast and reliable inspection of mat and shiny surfaces based on deflectometry and fringe projection....
RIFTEK: Today we are going to summarize information about Laser Sensors for Pavement Measurement and to announce new 2D Laser Scanners Series we are going to offer soon. Laser Sensors for Pavement Profile and Texture...
RIFTEK announces a new device Triangulation Laser Sensor RF602 Series. The distinctive feature of the sensors is a combination of ultra-compact design (45x30,5x17 cm), high sampling rate and linearity. As usual, sensors are available with RED (660...
Micro-Epsilon: The reflectCONTROL Automotive and surfaceCONTROL Robotic inspection systems provide easy, fast and reliable quality inspection of surfaces. From a complete chassis to a single painted part, smallest defects can be reliably...
RIFTEK continues to expand the line of 2D laser scanners. And today we are introducing two new models of 2D laser scanners: RF625-1050/165-85/100 and RF625-17/6-7/8. The first new model RF625-1050/165-85/100 has a sufficiently...
RIFTEK: Our company is expanding the line of triangulation laser sensors and today we are introducing a new device: High Accuracy Triangulation Laser Sensors with Large Base, RF6001 model. New Triangulation Laser Sensors are intended to be used in...
Micro-Epsilon: The reflectCONTROL Automotive automatic paint defect inspection system has experienced a global breakthrough with leading automotive groups. The inspection of shiny surfaces using this system is easy, fast and safe. From a complete...
Micro-Epsilon: reflectCONTROL Automation is designed specifically to meet the increasing quality requirements in production and reliably detects smallest defects on shiny surfaces. It is used for high speed inspection of shiny and painted parts,...
Micro-Epsilon: The idiamCONTROL sensor unit optimizes the maintenance of extruders by reliably detecting wear of housing bores. This non-contact method of inspection uses capacitive sensors that are arranged opposite to one another.
Micro-Epsilon: Particularly in automotive production, perfect surfaces - whether matt or shiny - are imperative. Even the smallest of defects must be recognised reliably. With the reflectCONTROL Automation surface inspection system, Micro-Epsilon...
RIFTEK: The system is intended for non-contact detection of the debris inside the circular grooves of different technological items, for example, brake calipers and so on. The system can be used also for groove seal profiling (seal deformation...
Micro-Epsilon: reflectCONTROL Automation is designed specifically to meet the high quality requirements in production and reliably detects smallest defects on shiny surfaces. reflectCONTROL Automation is used for high speed inspection of shiny and...
