Fast, digital measurement modules for DC voltage, DC current and DC power
The new digital measuring modules type ZED7 offer a dynamic measurement of DC signals with 1000 measurements/s, an overvoltage-proof measuring input with galvanic isolation up to 6kV and are versatile applicable. The modules are connected to ALMEMO® data loggers or measuring devices and operate with their own A/D converter. This makes the overall accuracy of the measurement independent of the measuring device. Dynamic measurement signals are measured with a fast conversion rate. The measured values are stored in the device and graphically displayed on the computer via software. Maximum, minimum and average values can be calculated via the device as well as via the software. The measuring input of the modules is overvoltage-proof and galvanically isolated. The digital measurement modules are available in three versions, for DC voltage, DC current and DC power.
They can be used in a wide range of applications, for example to monitor charging and discharging processes in the development of batteries for e-mobility, to monitor the supply voltage during switch-on and switch-off processes of DC motors, to test switches and circuit breakers or to monitor photovoltaic systems. The flexible ALMEMO® measurement technology allows the trouble-free as well as money-saving possibility to expand existing measurement systems as desired. When monitoring the electrical parameters of voltage, current and power of photovoltaic modules or systems, for example, the environmental parameters such as temperature, global radiation and other meteorological measured variables can be documented at the same time. There is no need to purchase an additional measuring device.