Lower Bavarian cooperation: In the matter of gas warning technology, Paul Nutzfahrzeuge relies on MSR-Electronic
It’s great when MSR products are used in Australia, India or the USA. It’s even greater when the products are also appreciated at home.
H2 gas sensors from MSR-Electronic monitor new hydrogen-powered technologies from Paul Nutzfahrzeuge GmbH.
Paul Nutzfahrzeuge GmbH is located at the Lower Bavarian city of Vilshofen on the Danube. The company is one of the European market leaders in the field of special vehicle conversion and construction. Within the past years, this business area within the Paul Group has developed into a successful global player that serves companies all over the world. Every year the chassis experts carry out chassis conversions, axle modifications and frame extensions as well as special configurations on up to 1,000 commercial vehicles.
Paul Nutzfahrzeuge is also keeping up with the latest technology revolution of the hydrogen-powered vehicles.
Thus, at the Vilshofen and Passau sites, appropriate halls were built in order to be able to continue working with the new hydrogen-powered technology. Since pure hydrogen (H2) is loaded and unloaded in these halls, reliable safety technology with gas warning and fire protection concepts is required.
MSR-Electronic GmbH from Pocking, approx. 30 km from Vilshofen, supports Paul Nutzfahrzeuge GmbH here with the planning, provision and commissioning of the fixed gas warning system with ATEX approval. Thanks to many years of experience in H2 detection, a professional monitoring solution was found for Paul Nutzfahrzeuge
Solution for H2 detection from MSR-Electronic
Thus, 5 PX2 hydrogen sensors and one DGC-06 were installed at each of the 2 sites. After commissioning, they ensure safety against dangerous hydrogen concentrations in the sensitive areas when serviced regularly.
The PX2 gas detector is used in industrial areas like oil/gas industry, biogas plants, petrochemical industry, power plants etc. in ExZone 1 (PX2-1) and/or 2 (PX2-2). It is also suitable for commercial areas like e.g. gas transfer stations etc., and for use on ships, shipyards and offshore platforms etc. With the 4–20 mA / RS-485 Modbus output signal the PX2 is suitable for connection to the Gas-Controller series by MSR-Electronic, as well as to any other controllers or automation devices.
- ATEX and IECEx certificates MSR-Electronic for electrical Ex protection
- SIL2 safety functions 4–20 mA, RS-485 and relays
- PX2-1 for zone 1 (and also suitable for zone 2):
- Type “Ex db” protection flame-proof enclosure
- PX2-2 for zone 2:
- Type “Ex nR” protection
- Enclosure: Additional FM and CSA certificates for Class I, Div. 1
- Continuous self-monitoring
- Microprocessor with 12-bit converter resolution
- Reverse polarity protection, overload protection
- Easy calibration, calibration service by exchanging the sensor head
- Proportional 4–20 mA output
- Serial interface to the control centre
- Alarm and fault signal relay
- LCD display with status LEDs
- Connection of SSAX1 sensor head as an alternative to SX1
- IP66 protection with SplashGuard accessories
The control centre: The Gas-Controller DGC-06
The Controller is used for monitoring and warning of toxic and combustible gases and vapours as well as of Freon refrigerants within a wide range of the gas measurement technique. Numerous adjustable parameters and set-points permit individual adaptation to many applications.
The DGC-06 Gas-Controller fulfils the functions of monitoring CO in garages, tunnels and cart tracks etc. according to the current EN 50545-1.
MSR-Electronic is a manufacturer of fixed gas warning systems with decades of experience in the field of building automation and gas measurement technology. The international company with headquarters in Germany has a wide range of methods for the detection of toxic and combustible gases. On this basis MSRElectronic develops individual gas sensors, controllers and warning devices for many applications, such as parking garages, tunnels, petrochemical industry or shipping. The products meet more than the general standards and regulations and can therefore guarantee the safety of the plant.