Sensirion: At this year’s Sensor+Test 2017 in Nuremberg (May 30 – June 1), Sensirion AG, the expert in environmental and flow sensor solutions, introduces the SGP – a siloxane resistant metal-oxide gas sensor with unprecedented...
Sensirion: The SGP gas sensor is based on Sensirion’s multi-pixel platform, which integrates four gas sensing elements into a very small 2.45 x 2.45 x 0.9 mm3 DFN package featuring a fully calibrated air quality output signal.
SenseAir wins the contest Boost Innovation™ with a contribution that aims to bring environmental measurements down to the ordinary citizens - in the form of an accessory which via wireless connection to mobile phone displays and maps air...
Pewatron launches the new air quality gas sensors from SGX Sensortech. The MEMS based MiCS MOS sensors simplify the process of detecting gasses that impact air quality. Using innovative metal oxide semiconductor chemistry (MOS) supported by a...
Pewatron launches the new intelligent air quality sensing module from SGX Sensortech. The new MEMS based MiCS-VZ-87 air quality module from SGX Sensortech makes the process of detecting VOCs simple. Using innovative metal oxide semiconductor...
E+E Elektronik: Now available for the Omniport 30 hand-held transmitter from E+E Elektronik is a CO2 probe with a measurement range of 0…2000 / 5000 / 10,000ppm. This means that the device can be used for ambient air monitoring or for CO2 leak...
E+E Elektronik: The new CO2 transmitter series EE850 and EE820 from E+E Elektronik allow highly accurate and reliable measurements of CO2 concentrations up to 10,000 ppm. The applied infrared measurement principle (dual wavelength NDIR* procedure)...
E+E Elektronik: The CO2 sensor module EE893 from E+E Elektronik allows highly accurate and long-term stable CO2 measurements in demanding OEM applications. Thanks to its very small size and low power consumption, EE893 can be used in both hard...
E+E Elektronik: The modular CO2 transmitter EE870 from E+E Elektronik is designed for maintenance-free use in demanding OEM applications. It offers various analogue outputs, Modbus interface, and a wide range of AC and DC supply voltage ranges....
E+E Elektronik: The EE871 CO2 probe from E+E Elektronik is designed for maintenance-free use in demanding OEM applications. The Modbus protocol permits easy retrieval and further processing of measurement values and facilitates simple integration...
SenseAir, in cooperation with Fiber Optic Valley and Acreo Swedish ICT, are running a multimillion-dollar project aimed at developing a new methane sensor – a new product that could mean more jobs for the Hudiksvall area. The product’s main...
SenseAir is expanding its production line in the area of safety applications, chiefly the measurement of explosive gases such as methane and propane. SenseAir has for some time been in cooperation with a Chinese electronics institute, whose aim is...
Pewatron: The PEWATRON Carbonoxy is the first CO2/O2 module to be available on a euroboard. The NDIR measurement principle is used for CO2, and the zirconia measurement principle is used for O2, which is known for the excellent durability of the...
SenseAir presents a new miniature low power NDIR CO2 sensor module, SenseAir®S8 4B. The sensor can be integrated into a wide range of alarm applications where CO2 detection is required, such as CO2 leakage detection. The primary application area...
E+E Elektronik: As the most innovative product in the category "Indoor Air Quality", the wireless transmitter EE245 from E+E Elektronik was honored with the "2012 AHR Expo Innovation Award". The price was presented at a solemn ceremony at the...
SenseAir presents the world’s smallest CO2 sensor, SenseAir® S8, which despite its small size has the same excellent performance as SenseAir’s other sensors. 20 years experience of research and development within the field of infrared gas...
SenseAir® presents the CO2 Engine® K33 LP, a new high-performance CO2-sensor which consumes a minimum amount of energy. The sensor is based on modern infrared technology (NDIR) and is designed for easy integration with other products. The...
SenseAir® presents a new high performance CO2 sensor optimized for fast response time, the CO2 Engine® K30 FR. The sensor is based on modern infra-red technology (NDIR) and is designed to be easy to integrate with other products. CO2 Engine®...
SenseAir: CO2 Engine® K33 LP is a low-power module. The adjustable measurement interval, results in average power consumption that can be reduced to less than 52 μA (measurement 1/60 min). CO2 Engine® K33 LP is designed for low-power...
SenseAir: CO2 Engine® K30 FR is a high performance CO2 sensor module optimized for fast response time. The sample cell is well protected by a particle filter and is designed for fast diffusion without any need for external pump. In addition,...
B+B Thermo-Technik GmbH has now a new, innovative triple-sensor in it´s portfolio! With this sensor, the relative humidity, temperature and CO2 concentration in residential and office spaces are measured and evaluated. The current measured values...
E+E Elektronik: EE240 wireless sensors from E+E Elektronik are the ideal solution for high quality, wireless measurement of humidity, temperature or CO2. With the introduction of state-of-the-art wireless data transmission, E+E Elektronik, the...
B+B Thermo-Technik GmbH: With the innovative gas warning device smartALERT(TM), you will be able to enjoy the comfortable warmth of your gas heater or cooking area even more. Because with the smartALERT(TM) you have a multiplicatively approved and...
E+E Elektronik: EE85 has been designed for accurate measurement of CO2 levels in heating, ventilation and air conditioning (HVAC) applications and it does perfectly match and complete the E+E product range. EE85 is available for measuring ranges 0...