Manufacturer | Belgium: BCM SENSOR TECHNOLOGIES b.v.b.a. (BCM) is a manufacturer specialized in design and manufacture of wide range of sensors, from sensing elements to complete transducers and transmitters, which are used for strain/stress-,...
BCM Sensor: For applications where customers need to measure pressure of viscous media or media with particles, and especially applications that involve cleaning process, we have developed a complete flush diaphragm sensor 101B(a19F) based on BCM...
BCM Sensor: 500G-series is specially designed pressure sensors for high pressure applications. As the 500G pressure sensor is made from one piece of 17-4PH stainless steel (mono-block structure), it possesses a rigid structure and can be used to...
BCM Sensor is proud to present a newly released absolute pressure sensor die, model SE113, which is a version of smaller foot-pint (2 x 2 mm), compared to its sister model SE103 that is one of our hot-sale sensor dies.
BCM Sensor: A new model AC101 from BCM SENSOR is one-axis capacitive accelerometer designed for a wide range of applications where dynamical model correlation or analysis needs to be performed in vibration test, shock test, and vibration...
BCM Sensor is proud to present an upgraded design of the CB-pattern stacked rosettes. This design has higher stability than the previous version and has the backing size minimized to 4 x 4 mm (of 1mm gauge length and 120Ω gauge...
BCM Sensor has recently released a newly developed flip-chip pressure sensor die for mass production. This flip-chip sensor die, model SE105, is based on piezoresistive working principle and is manufactured by 6” silicon micro-machining...
BCM Sensor has recently succeeded to integrate the flat leads into the pattern design of the metal foil strain gauges so that the flat leads become the part of the strain gauge. Flat leads are naturally insulated with the backing and encapsulation...
BCM Sensor is proud to present G-series glass-encapsulated NTC thermistors designed to sustain high temperature up to 260°C. Thanks to the glass-encapsulation, this series is widely used as a temperature detector and sensor, temperature...
BCM Sensor has introduced its hermetically sealed load pin of either IP67 or IP68 protection standard. The load pin has a tube-like construction made from 17-4PH stainless steel. Owing to its tube-like structure, the strain gauges are bonded on...
BCM Sensor has recently succeeded to manufacture the single-grid linear strain gauge of 5000Ω resistance in a compact size. Such high-resistance strain gauges are specially demanded in the applications of low power consumption, for instance the...
BCM Sensor: Model 110S pressure transducer from BCM SENSOR TECHNOLOGIES was specifically certificated by one of the European certification institutes for gas metering application. According to EN 1359:1999, an increase of 0.5% of the maximum...
BCM Sensor: Dynamic Measurement: Model IN201 two-axis inclinometers is developed to measure tilt angles induced by acceleration of the system which the inclinometer is built in. Typical applications: Dynamic positioning of vehicles and ships,...
BCM Sensor: BCM KC-series diaphragm strain gauges developed for compression and/or tension load cells are now available with revised ordering code to facilitate the selection of the right strain gauge parameters for specific applications. One...
BCM Sensor: BCM SENSOR model 132F based on metal foil strain gauge technology has a full-flush diaphragm and is ideal for the applications that require cleaning process for viscous pressure media or media with particles. Now model 132F is...
BCM Sensor is proud to present a new product group, NTC thermistors, available for batch production. NTC thermistors have negative temperature coefficient of resistance - their resistance decreases exponentially with their temperature...
BCM Sensor is specialized in customized design and solutions. Recently two types of OEM load pins have been successfully developed – oem5715 single-ended load pin and oem5719 double-ended load pin as shown in the picture. These OEM load...
BCM Sensor is proud to present two new options of pressure sensors which are integrated with flexible flat cable (FFC). As an example, this newsletter announces the newly released ceramic pressure sensors of the two options, as shown in the...
BCM Sensor has developed the 720G pressure transmitters for very high pressure applications. This model is based on our mono-block pressure sensor, 500G, which is manufactured from one piece of stainless steel, to realize highly robust...
BCM Sensor has more than 20-year experience in designing, developing, and manufacturing OEM strain gauges of a wide range, made from either metal foil or semiconductor material, for transducer application. For metal foil strain gauges, there are...
BCM Sensor has updated Submersible Liquid Level Transducers and Transmitters, model LV36, to have flush diaphragm. Thanks to the flush diaphragm, the LV36 can be used for level measurement of liquids where even mud or grass, or particles are...
BCM Sensor has recently successfully upgraded the backing materials of metal foil strain gauges. Now the options of backing material are FIBA: F: advanced phenolic resin, I: modified polyimide resin, B: laminated polyetherketone, A: laminated...
BCM Sensor has recently successfully upgraded the materials of the backing layer of its metal foil strain gauge from FIBA to FIBAL: - F: modified phenolic resin, - I: modified polyimide resin, - B: laminated polyetherketone, - A: advanced...
BCM Sensor: To improve safety level of cargo transportation, the smart ratchet tie-down strap is developed to recognize if the strap around cargo is tightened or is getting loose. To make the ratchet smart, BCM SENSOR developed a wireless force...
BCM Sensor has recently successfully developed a wireless sensor network (WSN) system. This system contains several wireless sensors and a wireless network monitor, as shown below. This system is an independent system employing 2.4GHz RF...
