Pepperl+Fuchs: Inductive sensor systems are characterized by their exceptional robustness and resistance to dirt, oil, grease and humidity under difficult ambient conditions. The fact that even large solar and wind power plants as well as marine...
Turck is offering inductive proximity sensors in compact designs with the BI series EH03, EG04, EH04K and EG05K, which have now been completely updated. With their reduced lengths of 22 to 15 mm, the new models are even better suited for use in...
Micro-Epsilon: The powerful eddyNCDT 3060 displacement measuring system is now even more flexible than before. The sensor portfolio has been supplemented by measuring ranges of 6 and 8 mm. This opens up new fields of application in almost every...
Micro-Epsilon: The inductive induSENSOR DTD gauge is designed for series solutions in machine building and automation. The new sensor system consists of a compact gauge and a robust cable controller. Its high accuracy and robust design make the...
Baumer’s IFRH series of inductive high temperature sensors have been designed for operating temperatures ranging from -25 °C to +180 °C. The two part proximity switches intended for flush front face installation are available in M8, M12 and...
Turck is expanding its sensor range with inductive measuring sensors with IO-Link and an analog output for flush and non-flush mounting. Thanks to the integrated microprocessor, the BI11-CK40 and NI11-CK40 models offer significantly improved...
Micro-Epsilon: The electromagnetic sensors induSENSOR are based on the well-proven inductive principle. They are employed both in single and large-scale applications. The measurement ranges of the displacement transducers extend from a few tenths...
Baumer: The resolution of Baumer’s IPRM 12 inductive sensor has been significantly improved. The sensor now measures with a resoution of up to 4 nm, which is to date unmatched in its class. With this performance it constitutes the ideal solution...
Baumer: Inductive marine sensors by Baumer were specifically developed for use in harsh environments. In order to minimize the planning work involved in the development phase for onshore and offshore system manufacturers, these sensors already...
Turck: Besides offering flush inductive measuring sensors with an IO-Link output, Turck is now also offering three non-flush variants. The NI4-M12, NI7-M18 and NI12-M30 models supply a signal proportional to distance over a 12 millimeter range as...
Baumer: The Baumer inductive distance sensor family IF08 now extended by small cubic designs in stainless steel housings with a yet large measurement range up to 3 mm and setting options via IO Link interface is outstanding and unique on the...
Baumer: In machine tool spindles, miniature grippers, or robotics, space runs out in a hurry. Every integrator knows the pain of trying to get cable runs to work in the system, without compromising the sensor performance. With its new IFRM 03...
Rechner provide the largest range of ATEX certified proximity switches and sensors. Amongst them are the MINI-Sensors, an example being the model we are presenting to you today. This has a diameter of only 6.5 mm and a cylindrical sensor body of...
SICK AG: The inductive IMB proximity sensor is a byword for reliability in harsh working conditions, whether it is in contact with cooling lubricants or being used outdoors. With its extended sensing ranges, made highly precise thanks to the use...
Turck: Inductive safety sensors with two OSSD (output switching signal device) outputs complete Turck's portfolio for safety technology. The proximity switches enable users to also exploit the benefits of contactless and thus wear-free position...
Baumer’s new inductive sensor IPRM 12 measures with a resolution of up to 50 nm, which is to date unmatched in its class. All of the necessary electronics are integrated in its M12 housing. At the same time, it is one of the fastest sensors in...
Waycon:The tried-and-tested LVDT series LV by WayCon is being expanded with the LV-G, which is equipped with rod end bearings. Thanks to the rod end bearings, the inductive sensors can be directly attached to the object to be measured. Here, the...
Waycon: The LVDT inductive sensor LVIG by WayCon is 20 mm in diameter and is made from nickel-plated steel. The rugged design and guided transducer bar allow for measuring ranges up to 200 mm without a problem. The articulated head...
Waycon: With high quality inductive displacement transducers, WayCon Positionsmesstechnik GmbH demonstrates that precise sensors can also be used in harsh industrial environments. The inductive sensor LVDT LVPH from WayCon was...
Balluff now offers an inductive IO-Link sensor with adjustable switching distance. The flush-mounting, teachable BES sensor in M 12x1 design with a switching distance of 0.5...2 mm offers full IO-Link convenience. This opens entirely new areas of...
Micro-Epsilon: The powerful eddyNCDT 3001 eddy current sensors are now also available with an M18 housing and measuring ranges of 6mm and 8mm. This enlargement provides the sensors with increased flexibility in terms of their potential...
Turck has developed the world's first inductive sensors for detecting carbon fibers. The patent pending sensor series detects both carbon fibers as well as pressed CFRP parts. It is based on uprox technology that has been further developed...
Baumer expands its portfolio of sensors for wind power plants with the new Series IFRR and IWRR inductive sensors. The sensors are extremely robust, absolutely reliable and, due to a large operating temperature range, suitable for onshore as well...
Waycon:With a housing diameter of only 4 mm, the LVISM is one of the smallest LVDT sensors of its kind. Furthermore, with a length of 7 cm it is not even twice as long as a match. Despite its miniature housing, the LVDT series offers measuring...
Baumer, the sensor manufacturer, expands its portfolio for the rail industry. With sensors from the IFRR and IWRR family, Baumer is the first company to offer switching and measuring inductive sensors that comply with the high vibration and shock...
Pepperl+Fuchs: Reliably High Sensing Range in All Installation Situations. The VariKont series from Pepperl+Fuchs enables higher sensing ranges, regardless of the type of installation and the mounting material. Actively detecting the metal...
Leuze electronic: The new IS 240 and IS 244 sensor variants from Leuze electronic impress in particular with their wide scanning ranges and very simple mounting and alignment. With the IS 240 and IS 244 inductive switches, Leuze electronic is...
HBM: Torque transducers can now be integrated in the PMX industrial amplifier system. PMX acquires torque, speed and angle of rotation fully dynamically. A PMX amplifier plug-in card can acquire up to four torque transducers simultaneously with a...
Novotechnik announces three versions of the SP 2800 Series of rotary position sensors—industrial, redundant channel industrial and motorsport. The industrial version is offered in three standard electrical ranges: 0° to 100, 308 or...
Pilz: For the key railway technology industry, at the Hannover Messe Industrie 2012 Pilz has been demonstrating how industry-proven control systems can contribute to the necessary modernisation of the railway infrastructure. Industrial control...
