Robust Analog 6DOF Vibration Accelerometer
Dytran Instruments, Inc., a leading manufacturer of piezoelectric and DC MEMS accelerometers, force and pressure transducers and associated electronics, presents the 7576A series, our new high-performance analog 6DOF motion sensor.
Series 7576A is a family of analog six degrees of freedom (6DOF) motion sensors containing three MEMS-based single axis accelerometers and three MEMS-based gyros to monitor the translational and rotational components of motion at the same physical point. This is used to determine the location of the center of rotation of a rigid body inside space. This compact, cost-effective, robust, titanium sealed sensor fits your most challenging real-world 6DOF application needs, including laboratory weather-exposed test track and laboratory environmental simulation condition.
The 7576A family utilizes a separate MEMS chip for each acceleration and angular rate channel with high drive, low-impedance buffering for measuring acceleration and angular velocity in commercial and industrial environments. Series 7576A is offered in a variety of ranges to accommodate a myriad of motion applications. Sensors can be powered with any power supply that is capable of producing voltages from 5 to 30 VDC with at least 12 mA of current. The voltage output from the sensor, depending on the measurement, can swing around 2.5 Volts, as low as 0 volts and as high as 5 Volts.
Typical uses for the 7576A series include but are not limited to the following test applications: vehicle dynamics, ride and handling, rollover, automotive safety, aerospace testing, large machinery including industrial off-road, aircraft flight dynamics, aircraft ground test, helicopter evaluation, amusement ride, and playground surface investigation.
For more information about the 7576A series or other products available from Dytran, please call 818-700-7818 or email email@example.com for more information and pricing.
About Dytran Instruments, Inc.:
Established in 1980, Dytran Instruments, Inc. (www.dytran.com) is a leading manufacturer of piezoelectric and DC MEMS accelerometers, force and pressure transducers, and associated electronics. Dytran products are used extensively in aerospace, automotive, test and measurement and industrial applications. Dytran products are widely utilized for on-board measurements in a variety of aerospace, commercial and military applications. Dytran maintains a world-class facility in Chatsworth (Los Angeles) California, USA for the design, development and manufacture of accelerometers, cables and accessories. This vertically integrated facility includes engineering, administrative, manufacturing, and automated machining capabilities. In addition, Dytran products are available worldwide via a network of distributors and representatives.