back button black v05

Heated Humidity Sensor for Radiosondes

Heated Humidity Sensor for Radiosondes

24 May 2017

The HMC03M humidity sensor from E+E Elektronik is dedicated for use in radiosondes and weather balloons. The sensor is characterized by a short response time even at low temperature. An integrated heating resistor ensures an excellent measuring performance under condensation and icing conditions. This makes the sensor ideal for weather observations in the upper atmosphere.

The HMC03M combines on a silicon substrate a capacitive relative humidity (RH) sensor and a heating resistor. By heating, the sensor quickly recovers after condensation or icing, which leads to a very good measuring performance even under extreme weather conditions. Another key feature of the HMC03M is the short response time at very low temperature. As a result, the HMC03M is ideal for use in radiosondes to measure humidity in the upper atmosphere.

The 5.85 x 2.85 mm small SMD sensor is appropriate for automatic assembling with subsequent reflow soldering. HMC03M is available on tape and reel of 500, 1000 or 2500 pcs.

Also humidity probes and transmitters for meteorology

E+E Elektronik’s product range for meteorology also includes probes and transmitters for highly accurate humidity and temperature measurement. The sensing elements of these devices are well protected from pollution and corrosion by the proprietary E+E coating. This leads to improved long-term stability and a longer lifetime, two essential criteria for long-term use in weather stations.

At www.meteorology-sensors.com E+E Elektronik offers a brief overview of its meteorological products.

  • E+E Elektronik Ges.m.b.H.
    Langwiesen 7
    A-4209 Engerwitzdorf
    Austria / Europe
    Tel.:+43 7235 605-0
    Fax:+43 7235 605-8
    Email: info@epluse.com
    Web : www.epluse.com
  • company website button
  • all entries button

back button black v05