back button black v05

Two-wire Hall-effect latch for speed and position sensing

Two-wire Hall-effect latch for speed and position sensing

09 September 2015

Highly sensitive automotive-grade device with excellent EMC performance

Allegro MicroSystems: The new A1245 from Allegro MicroSystems Europe is a two-wire Hall-effect latch with high magnetic sensitivity and excellent EMC performance in automotive and industrial speed and position sensing applications.

The A1245 latch is produced using the Allegro™ advanced BiCMOS wafer fabrication process, and implements the company’s patented high-frequency 4-phase chopper-stabilisation technique to achieve magnetic stability over its full operating temperature range from -40º to +150ºC.

Two-wire latches of this type are particularly advantageous in cost-sensitive applications because they require one less wire for operation compared with the more traditional open-collector output switches. In addition, the system designer inherently gains diagnostic capabilities because there is always output current flowing, which should be in either of two narrow ranges. Any current level not within these ranges indicates a fault condition.

The A1245 Hall-effect latch is in the high output current state in the presence of a magnetic south polarity field of sufficient magnitude, and remains in this state until a sufficient north polarity field is present.

The A1245 is designed for speed and position sensing of ring magnets or other moving/rotating assemblies in applications that are safety-critical and/or have long wiring harnesses.  Typical automotive applications include internal mode switch transmissions and transmission range switch/manual lever position sensor shift selectors; electronic parking brake motors; electronic power steering; and sunroof, tailgate and other motors. The device is also suited to industrial and consumer applications including white goods, industrial control and factory automation, and automatic doors. 

Overall ruggedness, including industry leading ISO 7637-2 performance, is achieved using an integrated voltage regulator, clamping diodes, ESD protection, and reverse-battery protection.

The A1245 is offered in two package styles. The LH is a SOT-23W style miniature low-profile package for surface-mount applications, while the UA is a 3-pin ultra-miniature single inline package for through-hole mounting. Both packages are RoHS-compliant with 100% matt tin lead-frame plating. The device is also offered with a choice of current levels corresponding to its off or low state. 

About Allegro
Allegro MicroSystems, LLC is a leader in developing, manufacturing and marketing high-performance semiconductors. Allegro's innovative solutions serve high-growth applications within the automotive market, with additional focus on office automation, industrial, and consumer/communications solutions. Allegro is headquartered in Worcester, Massachusetts (USA) with design, applications, and sales support centers located worldwide. Further information about Allegro can be found at www.allegromicro.com

Allegro MicroSystems Europe, headquartered in Chertsey, United Kingdom, is the European sales and marketing operation, and operates a network of representatives and distributors throughout Europe.  Allegro also has an engineering design centre in Edinburgh in Scotland and an application and marketing centre in Annecy in France.

  • Allegro MicroSystems, LLC
    115 Northeast Cutoff
    Worcester, MA 01606
    United States / America
    Tel.: +1-508-854-5359
    Web : www.allegromicro.com
  • company website button
  • all entries button

back button black v05