back button black v05

Fiber optic thermometer FOTEMP1-OEM

13 July 2012

OPTOcon AG: The fiber optic thermometer FOTEMP1-OEM is ideal for the use in microwave, high frequency and high voltage environments. FOTEMP1-OEM was designed to be integrated into your own system. Through its compact design a retrofit into existing model series is possible. It is ideal for fiber optical temperature measurement in high electromagnetic interfered environment, in microwave fields and other environments, where measurement with electric temperature sensors is not possible.

The standard analog output and RS-232 communication port allow for real-time data acquisition. The FOTEMP1-OEM, Single-channel-OEM signal conditioner can be controlled directly using the “FOTEMPAssistant” software. Hence, complex temperature profiles can be realized and an excellent monitoring of the results is possible. On the back of the measuring device is an LED, which shows the system status.

The outer jacket of the fiber optic temperature sensors is made out of teflon, at the sensor tip a GaAs-crystal (gallium arsenide) is attached. The probe sensor is completely non-conductive. Optocon’s fiber optic sensors offer complete immunity to RF and microwave radiation with high temperature operating capability, intrinsic safety, and non-invasive use. The sensors are also designed to withstand harsh and corrosive environments. Due to its characteristics, it is perfectly suitable for installation in microwave or drying ovens.

Starting at a light wave length of 850 nm GaAs becomes optical translucent. Since the position of the band gap is temperature dependent, it shifts about 0.4 nm/Kelvin. The measurement device contains a light source and a device for the spectral detection of the band gap. This guaranties fast, repeatable and reproducible measurements.

KEY FEATURES

  • Easy OEM migration
  • Rugged and easy to use
  • Small footprint
  • Measuring range: — 200 °C to + 300 °C
  • High accuracy: +/— 0.2 °C
  • RS-232, USB or Profibus DP interface

APPLICATIONS

  • EMI, RFI and microwave environments
  • High voltage environments
  • Harsh and hazardous environments
  • Nuclear environments
  • Aerospace applications
  • Process monitoring
  • Medical applications (MRT)

  • OPTOcon AG
    Optical Sensors And Systems
    Washingtonstrasse 16/16a
    01139 Dresden
    Germany / Europe
    Tel.: +49 (0)351 843599-0
    Fax: +49 (0)351 843599-111
    Email: info@optocon.de
    Web : www.optocon.de
  • company website button
  • all entries button

back button black v05