back button black v05

Level Measurement of Products with Natural Radioactivity

Level Measurement of Products with Natural Radioactivity

27 July 2015
PRC (Product Radiation Compensation)

BERTHOLD Technologies: Special applications require special solutions. So it is not rare that products where the level is to be measured already contain natural radioactivity. In practically all known cases, this portion of the radioactivity is not constant. Depending on the strength of radioactivity, a radiometric measurement will be affected to a greater or less extent.

The trend illustrates how the measured value of a level measurement is falsified if the radiation in the product continuously increases over time.

In this case, wouldn't it be good to know how strong the product radiation is at any given moment? This is possible with a second detector! It only has to be shifted around the vessel so that the radiation from the source does not reach the "compensation detector".

The information from this "compensation detector" must then be simply transferred to the level detector and will be processed there. This option provides our level measurement system LB 480 SENSseries.

Thus, a level gauge is realized, that is independent of any product radiation.

When designing a PRC-measurement the following should be considered:

  1. The compensation detector
    • must have the same crystal size, or detector length
    • must be placed at the same height.
    • must not be mounted in the beam path of the radiation source.
  2. The radioactivity in the product must be homogeneously distributed.

The PRC-measurement is available as a level gauge in the following SENSseries detector versions:

  • CrystalSENS (point detector)
  • UniSENS (rod detector)
  • SuperSENS (point detector with highest sensitivity)

In PRC measurements, a point detector is preferably used, because it is easier and better to shield. Moreover the point detector is located at a significantly larger distance to the radioactive product, as it is mounted at the 100% level position.

The PRC measurement has already been applied successfully several times.

For example, in an uranium processing plant in which the level of uranium-suspension is measured in several vessels. The dose rate coming from the product radiation is roughly around 80 ìSv/h.

Similarly, in the production of polypropylene, the PRC measurement could provide a solution. The product radiation at a dose rate of 0.5 ìSv/h can be up to 3 ìSv/h, which is approximately in the range of the usual designed source radiation at the detector. The experience which the customer could gather was so convincing that he wants to install further PRC measurements.

Please contact us, we will find the solution for your measurement problem!

  • BERTHOLD Technologies GmbH & Co. KG
    Calmbacherstr. 22
    75323 Bad Wildbad
    Germany / Europe
    Tel.: +49 (7081) 177 0
    Fax: +49 (7081) 177 167
    Email: Industry@Berthold.com
    Web : www.Berthold.com
  • company website button
  • all entries button

back button black v05