back button black v05

M3003 and M3007 Slipswitch - Underspeed Sensor

M3003 and M3007 Slipswitch - Underspeed Sensor

24 July 2018
M3003V10AI, M3007V10AI

4B Braime Elevator Components Ltd.: The M300 Slipswitch is an easy-to-use inductive proximity shaft speed monitoring device with an adjustable 0 - 30 second start-up delay, all housed in a 30 mm diameter moulded body. The self-contained unit has a single set point, which signals when the shaft speed has dropped by 20% of normal running speed. It is used for detecting dangerous slow down and underspeed conditions on conveyors, bucket elevators, air locks, mixers, fans, grinders and many other machines.

No connection is necessary between the sensor and the equipment being monitored. The proximity sensor detects a stud or bolt mounted on a shaft, or other suitable target. Ideally, the target should be of ferrous metal, but non-ferrous metal will be detected at a shorter range. Maximum range of ferrous targets is 8 mm (5/16”) and for non-ferrous targets is 5 mm (6/16”), assuming a 20 mm (3/4”) diameter target. Smaller targets may be used but operating distances will be reduced.

  • 4B BRAIME Components LTD
    Hunslet Road
    Leeds
    West Yorkshire LS10 1JZ
    United Kingdom / Europe
    Tel.: +44-(0)113-2461800
    Fax: +44-(0)113 243 5021
    Email: 4b-uk@go4b.com

    Web : www.go4b.co.uk
  • company website button
  • all entries button

back button black v05