back button black v05

Position, dimension

Read the latest product news, press releases, technical articles, white papers & application examples.
Major sub-categories: Angle, inclination, tilt | Distance | Edge, Alignment | Form, dimension, size, volume | Gap | Length, Displacement | Light barriers, curtains | Limit / position indicators | Presence | Position | Position angular | Position linear | Proximity | Thickness

International? - Read the latest news also in German | French | Spanish | Italian

Low Cost Cable Extension Transducer

Low Cost Cable Extension Transducer

Variohm: Celesco Transducers SP1 String Pot is available from Variohm Holdings. The SPI is compact, economical and a durable device that is extremely easy-to-install and has four measurement ranges; 4.75, 12.5, 25, and 50 inches. The CPI is also...

2007-07-06
Addressing micro concerns with macro performance

Addressing micro concerns with macro performance

Melexis: Ieper, Belgium – 12th of June 2007 - Melexis announces a new member in the Omnipolar™, Micropower Hall effect switch family. The MLX90248 employs CMOS technology to deliver a non-contact...

2007-06-18
Industrial joystick with USB interface

Industrial joystick with USB interface

Metallux: Established analogue and digital output signals of this hermetically sealed analogue foil sensor MetaPot and the - quasi with no abrasion – conductive plastic potentiometer elements and the conductive...

2007-06-12

Sensing solutions for advanced clutch control systems

Electricfil Automotive: Over recent years, clutch control has gone electronic, creating a need for sensors to deliver position, speed and temperature measurements to advanced control systems. Electricfil Automotive masters all the leading sensor...

2007-05-29

Position sensors drive automobile innovation

Electricfil Automotive: Measurement of the angular and linear position of various automobile components opens the way to innovative solutions to enhance driving pleasure, safety and performance while reducing fuel consumption, emissions and cost....

2007-05-29

Electricfil sensors and actuators rev up Diesel technology

Electricfil Automotive specializes in sensors and actuators for diesel engine control systems. Their actuators optimize combustion in direct-injection engines by accurately controlling the quantity, flow rate and timing of the injected fuel. They...

2007-05-29
MLX90333 – A New Dimension in Contactless Sensing

MLX90333 – A New Dimension in Contactless Sensing

Melexis: After the introduction of the MLX90316 in 2005 for Rotary Position Sensor applications, Melexis launches a new Triaxis Product targeted to 3D Position Sensor applications. Through the MLX90333, the patented...

2007-05-27
Laser fork sensors with specialized optics

Laser fork sensors with specialized optics

Balluff STM GmbH: The GLSK family features especially small external dimensions. All products have a ro-bust aluminum housing, which guarantees mechanical stability for an extremely precise optical acquisition system. Applications are in the...

2007-05-02
Heavy-duty FS series frame sensor

Heavy-duty FS series frame sensor

Balluff STM GmbH: Frame sensors used for counting metal parts are subject to extremely high mechanical stresses – falling metal parts can hit the sensor’s optical components or the connector and the sensor is often used in environments...

2007-02-15
Powerful piston detector

Powerful piston detector

SONOTEC: The piston detector by SONOTEC recognizes the position of a piston in hydraulic cylinders through the cylinder wall, by using ultrasound. Because of a new method of analysing and the possibility to adjust the resolution and deceleration...

2006-12-15
Steering Angle Correction for System 2000

Steering Angle Correction for System 2000

Kistler: The kinematics of an individual vehicle give rise to different measuring errors. System 2000 now has a remedy for this problem. The Type 5629A11 and 5629A12 ANI plug-in cards available as onboard electronics...

2006-11-20

Modern Smart Hall Sensor Technology and its Application ...

Melexis: Hall Sensors are well known as robust, accurate and cheap components for any kind of position measurement. Declared obsolete with each arrival of a new technology...

2006-09-18
Zero Defect Press-Fit Assembly Enabled by Force Monitoring

Zero Defect Press-Fit Assembly Enabled by Force Monitoring

Kistler: Press fitting of bearings, bushings or shafts, for example in housings or gearboxes, can be monitored very accurately through the variation in the pressing force over the displacement. The characteristic nature of this force curve allows...

2006-07-05
Watchdog

Watchdog "Elite" Bucket Elevator Monitor

4B BRAIME Components LTD: The 4B Watchdog "Elite" uses non-contacting, magnetic sensors to monitor belt speed and belt alignment at the head / boot or both. Additional sensors monitor bearing...

2006-05-15
Touchswitch

Touchswitch

4B BRAIME Components LTD: Belt misalignment on an elevator is a problem that is difficult to solve because it needs to be adapted for each elevator and type of elevator. When traditional techniques are used such as inductive, magnetic and...

2006-05-15
Pullswitch - Conveyor Safety Stop Switch

Pullswitch - Conveyor Safety Stop Switch

4B BRAIME Components LTD: Taut wire Pullswitch provides “failsafe” emergency stop protection along the length of the conveyor. Compact double-ended design with five changeover relay contacts, allows shutdown of the conveyor if the cable is...

2006-05-15
HotBus™ T500 Digital Monitoring System

HotBus™ T500 Digital Monitoring System

4B BRAIME Components LTD: Continuous Bearing Temperature & Belt Misalignment Monitoring System. The HotBus™ Digital Serial Communication System from 4B offers customers a much simpler and more cost effective approach to continuous bearing...

2006-05-14
Elevator / Conveyor Belt Misalignment System

Elevator / Conveyor Belt Misalignment System

4B BRAIME Components LTD: The AB400 Elite uses an electronic microprocessor control unit and up to 4 magnetic alignment sensors to monitor the alignment of the belts of 2 separate bucket elevators / conveyors. Alternatively the 4 sensors can...

2006-05-14
CBS

CBS

4B BRAIME Components LTD: The 4B CBS is a mechanical switch which detects and prevents belt misalignment on conveyors. It reacts to the tilt caused by the misaligned belt. The CBS comes with 2 outputs - 15° and 30° - which trigger a first step...

2006-05-14
BAP2 - New Alignment Sensor for Bucket Elevators

BAP2 - New Alignment Sensor for Bucket Elevators

4B BRAIME Components LTD: The BAP2 is a externally mounted non-contact alignment sensor reading through a polycarbonate window in the elevator case. The fail safe magnetic sensors remain unaffected by dust or product build up, continuously...

2006-05-14
Hole diameter measurement

Hole diameter measurement

Capacitec, Inc. in Ayer, MA USA with European Headquarters based outside Paris is pleased to announce the acquisition of the CMS hole measurement product line from MSI. Since 1986 the CMS non-contact capacitive based hole and countersink...

2005-12-27
Self-controlled heater in polymer technology integrated in a potentiometer

Self-controlled heater in polymer technology integrated ...

Metallux: Electronic components such as sensors and actuators are frequently subject to changes in temperatures. Especially fork lifts trucks being used in cooled warehouses or sensors in building...

2005-07-12
Potentiometers with self diagnostic capabilities

Potentiometers with self diagnostic capabilities

Metallux: Still CP Potentiometer used for position sensing have the highest proportion in accordance of the number of used products. With its special, robust conductive plastic layer and intelligent...

2005-07-12
Potentiometer with heating

Potentiometer with heating

Metallux: Frequent and rapid changes in temperatures mostly are the reason for mechanical stress which may cause different extensions of the material. Due to fast declining temperatures systems and...

2005-05-12
<<  43 44 45 46 47 [48

back button black v05