Exergen Global: Help Your Customers Increase Safety, Reliability & Speed with Exergen’s IR Sensors. For processes such as diagnostic procedures, skin treatments and medical interventions where blood or saline solutions are involved,...
Exergen Global: When supplying blood to patients it is essential that the blood’s temperature is carefully warmed to 37°C to ensure patient safety and wellbeing. Blood must be warmed to this temperature prior to infusion, because,...
Exergen Global: For high speed graphic processes, the limiting factor on the productivity of the equipment is usually the drying/curing time. To maximize the speed without quality loss, it is important to be able to determine quickly when the...
Exergen Global: Non-contact thermal sensors are remarkably diverse devices that can help ensure higher process speeds, more precise accuracies, tighter tolerances, and higher yields for a wide spectrum of manufacturing processes, including...
InfraTec GmbH: Pyroelectric detectors are ideally suited for gas analysis. Until now, this has been complicated if many gases should be measured. There were often simply too few measuring channels for this purpose. The new LRM-278 from InfraTec...
Heitronics: Infrared radiation thermometers measure the gas temperature in combustion processes quickly and reliably. The sighting depth of the device depends on the process conditions and the selected wavelength. Heitronics has developed an...
Exergen Global announced that its Micro IRt/c-HB infrared non-contact sensors are being used to measure blood product temperatures in the ThermaCor® 1200 Rapid Thermal Infuser designed and developed by Smisson-Cartledge Biomedical, LLC and...
Exergen Global introduced the D501LN, a handheld certified infrared scanner that provides all the features found in Exergen’s DX501, with an extended nosepiece to enhance safety and ease-of-use. The length of the nosepiece in the D501LN...
Exergen Global: Reflective cones are a very useful addition to IR sensors when high accuracy and reliability are important for moving process measurements whose a) surface emissivities are likely to vary, and b) ambient temperatures in the...
Texys: After the success of the Texense IRN-RC flexible strip sensor, Texys have produced a new fully customizable, multi-head sensor, the Texense MB-Flex. Based on the same principal as the IRN-RC, you can now fully adjust the position and number...
Variohm EuroSensor: New from motorsports and aeronautical sensor specialist Texense - and available with full support from Variohm EuroSensor - the IRN2-C linear analogue & digital infrared sensor provides a 4…20 mA...
Texys: The new IRN2-C combines one of the most reliable industrial signal transmission techniques (4-20 mA) with Texys world-famous, race-proven grade of miniaturization and robustness. Texys research & development team worked on a unique...
Exergen Global, an award-winning thermal solutions provider, today announced that it is partnering with Novus Automation Inc. to create The Game Changers, a family of exceptionally accurate, small-sized, simple-to-use temperature sensors for a...
Exergen Global, an award-winning thermal solutions provider, announced that Papcel, a leading papermaking machinery manufacturer, is employing Exergen’s non-contract infrared sensors in its Softcalender paper machine to ensure optimal...
Balluff: The sensor specialist Balluff has developed a new BTS infrared temperature sensor with IO-Link interface and two switching outputs. It can monitor temperatures between 250 and 1250 °C even in inaccessible or hazardous areas, detect...
Exergen Global, an award-winning thermal solutions provider, announced it is partnering with VDL Group, a leading international industrial manufacturer headquarted in Eindhoven, to provide a custom solution for HP Indigo 10000, 20000, and 30000...
Exergen Global, an award-winning thermal solutions provider, today announced that TomTom-Tools, a Swiss-based company that provides state of the art measurement tools for the cement industry, is employing Exergen’s micro IRt/c-K as part of a...
Micro-Epsilon: The thermoIMAGER G7 is an industrial thermal imaging camera specially designed for applications in the glass industry. The spectral range of 7.9µm enables reliable measurements even on thin glass sheets without unwanted...
Exergen Global: During the process of papermaking, a dilute fiber suspension is drained through a screen, creating a mat of randomly interwoven fibers. Water is removed from this mat of fibers by pressing and drying it to eventually make paper....
Exergen Global: Flags, carpet, tiles and everything else that is printed on Large Format Printers with protective paint needs to be completely dried, cured or fixated before the end-products can be cut, folded, or otherwise worked on. Depending on...
Melexis, the global microelectronics company enabling future innovation through a philosophy of inspired engineering, has announced two new sensing technologies for simplified integration of temperature measurement into applications that enhance...
Exergen Global: A significant amount of heat is created when PET bottles or other used plastics are ground for recycling using a granulation machines. When operators increase the granulation grinding wheel speed in order to maximize machine...
Exergen Global: When using infrared temperature sensors (IRt/c) in curing systems there are three common challenges that you should consider: 1. During the curing process, the intense heat from the curing lamps conducted to the sensor area can...
Micro-Epsilon: The new thermoMETER CTP-3 infrared pyrometer enables the non-contact temperature measurement of thin polypropylene, polyethylene and polystyrene film. It operates at a wavelength of 3.43µm which is especially suitable for...
Heimann Sensor is a well-known manufacturer of infrared sensors and modules. Applications include remote temperature measurement and gas detection in industrial, medical, automotive and consumer markets. For several years, we have been developing...
Exergen Global, an award winning thermal solutions provider, announced today general availability of its Extreme IRt/c, a non-contact temperature sensor, a device that withstands extreme vibrations and other environmental changes while maintaining...
Exergen Global: Based on its recent analysis of the non-contact infrared (IR) temperature sensors market, Frost & Sullivan recognizes Exergen Global BV (Exergen) with the 2015 Global Frost & Sullivan Entrepreneurial Company of the Year...
Exergen Global: For high speed printing processes, the limiting factor on the productivity of the equipment is usually ink drying time. To maximize printing speed without quality loss, it is important to be able to determine quickly when the...
Exergen Global introduced its Sensoranics Methodology, a unique, proprietary, integrated approach to developing best-in-class infrared temperature sensor solutions for complex production processes across all industries. The company’s...
Exergen Global announced that its micro IRt/c.SV infrared, non-contact sensor plays a crucial role in maintaining consistent probe temperature for the NeuWave Certus® 140 2.45 GHz Ablation System. The Certus® 140, a soft-tissue ablation...
