back button black v05

New Differential Remote Charge Converters for Aerospace Applications

New Differential Remote Charge Converters for Aerospace Applications

18 May 2006

May 18, 2006, Depew, NY, USA – The Vibration Division of PCB® Piezotronics, Inc., introduces Series 495B10 differential remote charge converters, for use with differential charge output piezoelectric accelerometers. Differential sensors and signal conditioning electronics are widely used in flight test applications due to their common mode noise rejection, which greatly reduces noise in the measurement signal. These rugged, low noise units not only convert a transducer’s differential high impedance charge input signal to a low impedance voltage output and supplies the normal acceleration output, but also supplies a separate integrated output for velocity.

Series 495B10 charge converters operate from 10 to 32 VDC power, over a temperature range of -13° F to +185° F (-25° C to +85° C) and are packaged in a lightweight aluminum housing. They are available in charge sensitivities of either 2 mV/pC or 10 mV/pC. In addition, the user can specify a low frequency roll off of 10, 15, 20 or 25 Hz. The input is a two-pin, 7/16 inch threaded connector and the output is a six-pin bayonet-style connector.

For additional information, contact the Vibration Division of PCB Piezotronics, Inc. on +001 716 684 0001; E-mail: vibration@pcb.com; or fax on +001 716 685 3886. For other PCB products, contact PCB directly on +001 716 684 0001, or visit our web site at www.pcb.com.

# # #
PCB and ICP are registered trademarks of PCB Group Inc.

  • PCB Piezotronics, Inc.
    3425 Walden Ave.
    Depew, New York 14043
    United States / America
    Tel.: 716-684-0001
    Fax: 716-684-0987
    Email: info@pcb.com
    Web : www.pcb.com
  • company website button
  • all entries button

back button black v05